1992 Jeep Wrangler "used front" Questions

...front axal seems loose maybe bushing is gone. Have not used four wheel drive for 70,000 miles. would this make the front end shake. If the u- joints are loose, yes, that would cause the front end to ...

1998 Ford F-150 4-wheel drive won't engage i have an electronic engaged four wheel drive on my truck and it was working fine and then recently when i kick it in it says on the dash that it's kicked in

front axle. It is used to engage the front axle when the transfercase is shifted into 4WD. Check the vacuum lines on the front axle to make sure they are connected. The passenger side axle shaft has a

...spin the wheel with the least traction. The only way the other wheel would have spun is if that happened. Reason front posi units aren't used on the street is that they make steering

my jeep ticks constantly and the front end shakes likely two unrelated problems. If you have good oil pressure (usually around 40psi) your lifters are sticking or you have wear on lifters, cam, rocker

1993 Jeep Wrangler - Front Axel U joint, why no C clips? 1993 Jeep Wrangler - I am a new jeep guy and I don't see any C-clips on the front axel U joint ends. Is this normal. What holds the U joints in

...used the four wheel drive. If you have a square box mounted to the right front axle tube, make sure the vacuum lines are attached to it and that it's working. If it's OK, then you have likely ...

...have a broken collar, or perhaps a broken axle shaft. but it's probably just the vacuum hoses or the motor :) i hope that helps! check the front hubs could be frozen. if it hasen't been used in a ...

5 speed tranny i have a ba5 or ba10 peugeot 5 speed. reverse is gone. i'm in the prose of taking the tranny apart. the studs that are in the front that hold the bell housing on. how do you get them ...

need to replace front rotors and brake pads I need to replace front brake pads and rotors on my 94 Jeep wrangler. I have some mechanical background, can I do this job myself? All you have to do is ...