2001 Isuzu Trooper "camshaft marks timming" Questions

...camshaft marks on isuzu trooper 2001 3,0 dohc engine the timming gear that the belt runs on has a mark (V cut in gear) to rear cover at about 12 o clock and crank pulley has timming mark for top dead ...

marks on the pulleys are supposed to line up with the covers and the camshaft is supposed to line up with the oil pan mark ( no.2 piston all the way up to the top ) but it still doesnt work. what am i

...if belt has broke or you have turned any gear you must remove rocker covers to check positions of camshafts front lobes are in certain spot as well as timming mark on belt driven cam gear to cover ...

...marks. Dual overhead camshaft. Disconnect battery negative cable. Remove power steering and air conditioning compressor drive belt by loosening power steering fasteners. Remove generator bolts and ...

...timming marks on the cam pulleys? there isnt marks!the cam pulleys have do nothing with timing!remove the valve cover and see in the other end of the camshafts and find two eccentric cuts!turn the ...

...of timming marks on crankshaft(Yellow dot) and the camshaft(Two blue dots) and if you know where I can view an illistration of timming marks Thanks! didnt you mark it before you removed the old

...has no timming marks on the camshaft, Where could they be. But i did manage to fire it, nevertheless, i need to know how to locate the marks for sure. Iam a mechanic THGERE MAY NOT BE ANY ...

marks camshaft gear timming marks ON THE CAMSHAFT GEAR ARE UNE HOLE NEED TO MATCH THE HOLE WHIT THE MARK A THE CYLINDER HEAD AND ON THE CRANCSHAFT GEAR ARE UNE DOT ALING WHIT THE MARK A THE ENGINE OIL

...Holes lining up for locking Bolts,in line with camshaft marks and Crank Pully Timming Mark on Compression stroke of No.1 Cylinder. check that the firing order of the plug leads is not out 180 ...

...marks on the camshaft and crankshaft sprockets are in alignment (see illustration). Loosen the timing chain tensioner nut as far as possible without actually removing it. Remove the camshaft sprocket ...