...broken bolt / stud as they are turned to remove it. The Sears unit I use are about 1 inch tall and can be used with a wrench or socket. Set over the bolt / stud , tap lightly as you slowly turn the ...
Question about Ford Cars & Trucks
...remove broken stud with a wrench or vice grip or rent or buy a right angle drill and drill onto broken stud and use heat and an extractor to remove ---lastly if to tight to do either unbolt head and ...
...broken stud and remove with a socket wrench. Here's an excellent read on the how to of removing broken studs....it saves me the time of having to type it all out. Good luck. ...
...remove many other parts even to see the manifolds.make sure when manifolds are off that they are checked for warpage,this is a simple test needing only a straight edge and feeler gague.ask your tech ...
...remove and be concerned about? Whatever it takes, but make sure you soak some penetrating oil oi wd40 on others to avoid any more being broken. Pulling the manifold is the safest and quickest way. ...
heat the nuts/studs that fasten it to the manifolds.Non-availability of the required equipment in this case may mean that you will have to remove the exhaust manifold(s) to drill out broken studs
Question about Cadillac Cars & Trucks
...remove the exhaust manifold on the right side of a 94 4.9l engine in a cadillac deville. It has a broken bolt in the exhaust. What is involved in removing the manifold? I suggest you use all new ...
Question about Cars & Trucks
...to remove the manifold , drill and use an extractor tool to remove the broken stud however if the stud is at the end of the manifold , consider this many exhaust manifolds do not use a stud at the ...
...broken bolt and weld it together. then take the torch and heat the nut and head up. you need to heat these up to a glowing red. then start removing the bolt. go back and forth if you have to. good ...
broken exhaust pipe studs. Sometimes the little 8mm bolts will also break, but since they only hold the heat shield, it is of no great consequence.Then all you have to do is remove the two bolts
675 questions posted
Usually answered in minutes!
480 Questions
423 Questions
323 Questions
317 Questions
281 Questions