1998 Honda Civic "fit gas leak" Questions

...washers are already crushed and so require more torque to seal. Usually just tightening the hex fitting more will make the seal. Always use two wrenches, one to keep the filter body from turning ...

...describe , one of those switches ( most likely no gas) is the switch check for oil dust around the fittings , condenser or have an ac specialist check for leaks and ...

...leak,I use them here,they also give you a 6 month warranty.Here's their link,call them up.https://www.midas.com/ The aircon should remain serviceable for around 2 years between topups. I suggest you ...

...leak ? the air con was re gassed last year and has worked perfectly up until now Hi: You should verify that your AC system still has a full charge of refridgerant, and if it does, The problem is most ...

...there. Does anyone know what it IS? sound like a plugged cat. some shops have a pressure guage that fits where the oxy sensor is and you can test your back pressure. i would recomend an exhaust shop. ...

...on the injectors. Make all re-connections air tight, ensure all bolts are tightened and all wires fitted back into the sensors. This should sort ...

...gas odor in my 98 Explorer. I comes on when you start it and continues as you drive. This is a new problem, the motor is a new rebuilt 2 months old. The fuel lines may have a leak: Replace leaking ...

...gas around the system. If the leak is behind the pulley clutch it is p[ossible to have it replaced and if it is at a fitting have the line replaced You will have to regas the system when done and fit ...

...gas cap.make sure it's a tight fit and s slso ck for any nicks on the filler opening, where you put the gas pump into fill gas, sometimes s small dent, scratch, nick won't allow cap to seal and cause ...

THERE IS A FITTING ON TOP OF ENGINE THAT CAME LOOSE LEAKING GAS HUSBAND THINKS VAPOR LOCK HE TOOK IT OF CLEANED IT AND SEATED IT BACK ON AND SEEMS TO BE HOLDING AND NOT LEAKING IS THIS SOMETHING I SH ...