2006 Chrysler Town & Country "fix sliding door locks" Questions

sliding door does not lock with button on front doors or keys Your question is alittle vague,...so Ill do my best...If your van has central locking (all the doors lock when you lock the drivers door ...

...sliding door and located the door lock solenoid( the locking solenoid was bad). but it was sOOOOOO dificult to remove the door lock solenoid ( and I thought I had every tool) that I had no choice but ...

...sliding door to the stationary part of the car near the locks. they should be clean and shiny to have a prfect contact. if they are ok, you have to open the door panels and check the solenoids of the ...

...sliding door not working The power door lock on the passenger side sliding door of my 2006 Town & Country doesn't work, but all the others do. Any ideas? I saw someone's response about cleaning ...

...sliding door a little harder than normal today (solely accidental) and now the locking mechanism won't disengage to open it. How do I fix this without taking my car to a shop? You will need to remove ...

sliding door will not work. Can hear the solanid engage but the door will not open automatically. it appears the motor is bad. looking on how to replace the door motor I have the same problem and have

...sliding door problem. the doors work fine from the remote or the buttons in the front but do not work from the buttons in the back on the door posts. check and make sure the child locks ( switch in ...

...close automatically with the button right at the door and it will open and close manually. If you could help with how to fix these problems I would be grateful. locate and replace door control ...

...sliding door won't unlock with the remote or the actual switch on the drivers door. It locks fine with the remote. HOWEVER, when you try to lock it with the drivers control, each time you hit it, it ...

...sliding door won't unlock. I was able to get the inside trim off the door and expose the inner workings but was unable to unlock the door manually. As i was trying to put enough pressure on the ...