2006 Chrysler Pacifica "pass ignition coil" Questions

Ad

...ignition module uner the coils. The pass key cuts off the starter and fuel does not effect spark. if you have no spark crank sensor cam sensor ignition module coils and wiring are all that is

Ad

Question about Chrysler Pacifica

2 Answers

...pass emisions test PO353 is: Ignition primary fault cylinder 3 PO351 is: ignition coil 1 primary circuit PO355 is: ignition coil e primarysecondary circuit malfunction PO455 is:EVAC Control System ...

Ad

ignition coil. If you have a test light or a voltmeter, check for power on the primary wire to the coil (on the + terminal at the coil) with the key ON. You should have power to the coil with ignition

...D,that is another ford product Codes for COP Ignition Coils---PO301,302,303,304,305,306,307,308 The last # is the cylinder V8 Cylinders-- 1234 pass side,front to back 5678 driver side V6- 123 front ...

...Ignition Coils. I believe you need a 7mm socket and 7mm small wrench. You need a PO301 to PO308 code- for a bad coil. Their about $60.00 at auto part store. Just do the one that fails. Cylinder #1 is ...

Question about Chrysler Pacifica

1 Answer

...a crankshaft & a camshaft sensor Is the ignition coil good (primary and secondary coil resistance alright)? Did the ignition unit (IGBT) passed the 3V battery test? If so, you may have an ECM

...AND CHECK THE COIL PRIMARY RESISTANCE USING A DIGITAL VOLTMETER. IT SHOULD BE 0.1 OHM.SECONDARY RESISTANCE SHOULD BE 5000 TO 25000 OHMS..IF COIL PASS ITS THE IGNITION MODULE.IF COIL FAILS.COIL IS

coil normally comes from the ignition switch from both the start and run positions or from the ecm. IT passes through the coil and down to the distributor either to the points or the electronic module

ignition coil, the part that creates spark  at the spark plug.  If you follow the electrical path from the coil wire to the distributor cap, and from there, the spinning rotor just under the

Question about Chrysler Pacifica

1 Answer

...ignition switch to the coil so that you have 2 wires on one terminal and one wire to the distributor. Check which coils you have been using as you will see on the bottom a note --use with resistor--. ...

Not finding what you are looking for?
2006 Chrysler Pacifica Logo

812 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...