Question about Buick Lucerne
I replaced the transmission in a 2006 buick lucerne. no problem until I went to start the car . no start no communicaion with computer Quite likely the on-board ECM needs telling the transmission has ...
...and the computer says the motor has reduce power Stabilitrak doesn't reduce power to the engine. It disengages, no ABS. Reduced power is engine or transmission problems. Have the codes ...
engine or transmission knock / rattle upon acceleration under load. Only occurs when driving, not in neutral / park . Once noise starts and vehicle starts moving, I can stop or start rattle/ knock ...
Question about Buick Lucerne
...engine control module (ECM) notifying it that CRANK has been requested. The ECM verifies that the transmission is in Park or Neutral. If it is, the ECM then supplies 12 volts to the control circuit ...
Question about Buick Lucerne
...either . Electronics involved , locking solenoid's etc.... Floor or column shift ? The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of ...
...neg lug for 30min. or 1hour and put it back all the brains reset and can now function ok. the transmission may do to auto-learn model , no worry there. clean the sunset sensor. lens. and use ...
Question about Buick Lucerne
...intake manifold gasket p0107 - Faulty Barometric Pressure sensor or its wiring system p0758 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid B wiring problem or its valve p0753 ...
Question about Buick Lucerne
...transmission hesitates to shift from park into any gear. No problems with shifting through gears in regular driving. Is this a major repair? Only 113,000 mi. Inspection is required.For Automatic ...
...won't shift from 3rd to 4th 76 Cadillac automatic won't shift from 3rd to 4th gear.. Fairly new transmission what can be the problem??? For Automatic transmission problem,Check the list of help ...
Question about Nissan Cars & Trucks
transmission operation. Shifting problems can also be caused by internal mechanical faults within the transmission, such as worn clutches, damaged gears, or a malfunctioning valve body. These problems
672 questions posted
Usually answered in minutes!
111 Questions
54 Questions
49 Questions
22 Questions
32 Questions