2003 Pontiac Vibe "car stereo sleeve" Questions

Ad

...car stereo You best bet, because of a warranty, is to have a professional shop install your stereo. But if you are like all of us guru's here, you like to get your hands dirty. First you need to ...

Ad

...stereo. Fit the radio installation sleeve provided with the aftermarket stereo to the radio installation kit. Feed the sleeve through the portal of the radio installation kit and bend the tabs on the ...

Ad

...stereo in each and every car has a different code usually a four digit one.Try looking in the owners log book case for the key code it may be written down on a small piece of paper or it could be ...

...stereo into the sleeve you just installed. Then you are ready to make all the needed connections. Before you reassemble everything make sure to do a test run with your stereo. If all is well ...

Question about Pontiac Vibe

1 Answer

sleeve. You should then be able to remove your old radio. As for wiring , I had to discard the wire harness the came from the old stereo and hard wire the new unit. I used a 12v circuit tester to find

Question about Pontiac Vibe

3 Answers

Car Radio Amp Wire = Blue 8 Wire Plug (Wires were wrapped in a grey outer sleeve, had to cut sleeve to get to wires.): Right Front: White w/ Green Stripe (+) Brown (no stripe) (-) Right Rear: Purple w

...stereo dock. Pay attention to where the wires were removed and connect the unit's wiring to the leads in the wiring harness adapter. Connect the antenna cable lead into the antenna detector. ...

car run untill the security light come on. that permanently puts the security to sleep. The other way is what they do when they install remote starters in these cars. Go to a stereo shop with your key

Question about Cars & Trucks

1 Answer

...Stereo System model number CHT909BT. It had the power cord cut. So I spliced it back together with a good cord. As I done that I noticed, well I’ll send a pic. But I’m getting no power. Even if I did ...

...stereo that came with the car it the AE101 model and it has 2 more wires than my new stereo do i need them ? can anyone help please Go to the auto parts store and get a wire adaptor made for a 1992 ...

Not finding what you are looking for?
2003 Pontiac Vibe Logo

569 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2005 Pontiac Vibe
2005 Pontiac Vibe

282 Questions

2004 Pontiac Vibe
2004 Pontiac Vibe

260 Questions

2006 Pontiac Vibe
2006 Pontiac Vibe

169 Questions

2009 Pontiac Vibe
2009 Pontiac Vibe

88 Questions

2007 Pontiac Vibe
2007 Pontiac Vibe

53 Questions

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...