...floor jack, 4 good safety stands and common hand tools, also a brass drift to release fuel pump module retainner ring on top of tank, don't use steel one spark and u are up in smoke. the fuel pump is ...
...floor above the gas tank and remove the fuel pump that way. Probably a dumb question, but I need the ask. Thanks some have a trap door in floor board to get to fuel pump, check it out. need to take ...
...a way to cut the floor without cutting the tank. The gap is less than one inch. And the fuel lines come out with the sending unit. They have to be disconnected a few inches away from the sending
Question about Cars & Trucks
...like the 2000, it's in the gas tank, along with the fuel pump. To replace it you'd have to drain and drop the tank, OR cut a hole in floor directly above the pump. Good luck Best to check on ...
Question about Oldsmobile Alero
...cutting the floor. You remove the back seat and there are four bolts under the mat if you remove them and lift the fastened cover you will see another cover which has some pipes and electrical socket ...
floor above the gas tank where the fuel pump mounting plate is. Be careful not to cut any fuel lines, wires, or the tank itself, or you could have a fire or explosion. Then when you are done, you will
Question about Oldsmobile Alero
cutting an access hole in the body after removing my back seat. On which side is the fuel pump located? It seems less complicated and less expensive to cut a hole in the body above my fuel tank, which
Question about Cars & Trucks
i have a 1988 e 150 conversion van,both fuel pumps appear to be not working.Im thinking of cutting holes in the floor above each pump,can u tell me about where they are located? 302 on top of gas tank
...elecrtical and fuel line connections.So the only way to do it with the tank on is to cut a hole in the floor above the fuel tank, but this is a good way to blow yourself up!!!!!!! Take the tank
Question about Oldsmobile Alero
floor so that in wouldn't collapse into the tank (I actually cut it so it partly rested on the truck bed beam. When cutting the hole in the bed, I placed a large wet bath towel over the pump/tank,
1,271 questions posted
Usually answered in minutes!
1,478 Questions
1,272 Questions
1,097 Questions
1,065 Questions
662 Questions