2005 Dodge Neon "tensioner pulley" Questions

Ad

...pulley or tensioner pulley? My car is making a loud noise, how can I figure out which pulley its coming from? Take the tension off the belt and then move each pulley by hand . If the tensioner pulley ...

Ad

Question about Dodge Neon

1 Answer

tensioner pulley on a 2005 neon? i have the tool to remove the power stearing pully. is there also a tool for the tensioner pully? will i have to pull the motor? No you will not have to pull the motor

Ad

...tensioner pulley in a 2003 Dodge Neon I need to know how to remove the tensioner pulley in a 2003 dodge neon. Everything I have found so far, including the haynes manual says remove the engine mount ...

Question about Dodge Neon

1 Answer

...tensioner pulley on a 2005 Dodge Neon? You have to remove the whole bracket that the tensioner assembly is attached to then you can get at the bolts that holed the tensioner and pulley together to ...

Question about Dodge Neon

2 Answers

...tensioner pulley I have to replace my pulley as well; all of the information I've found on the net say's you need to remove the whole engine mount plate assembly from the left side of the engine and ...

Question about Dodge Neon

2 Answers

...pulley is held onto the tensioner by a torx bolt. Once the bolt is removed, the pulley can be lifted right up and off of the shaft it is seated on..See photo below...Guru...Saailer ACDELCO Part # ...

tensioner pulley. Mine went bad and was "screaming" I thought it was the power steering pump and I replaced it only to find that it wasn't the problem. I couldn't find any bolts and deemed it too much

Question about Dodge Neon

1 Answer

Trying to remove the old tensioner pulley but can't get to it. What do i have to do? remove the tire and plastic rock guard and go through the wheel well to get access to the tensioner pulley

...the pulley, you may need a tensioner bar or sometimes a 3/8 ratchet will fit. when you instal the new one there may be a keyway or alignment dowel, besure it slides into place before tightening it ...

Question about Dodge Neon

1 Answer

...of the tensioner not on the pulley but the unit itself. unbolt this and you can remove the old one. the second belt should be replaced if your doing one. here is a picture to aid you. hope this ...

Not finding what you are looking for?
2005 Dodge Neon Logo

1,099 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Dodge Neon
2002 Dodge Neon

861 Questions

2004 Dodge Neon
2004 Dodge Neon

762 Questions

2003 Dodge Neon
2003 Dodge Neon

743 Questions

2000 Dodge Neon
2000 Dodge Neon

606 Questions

2001 Dodge Neon
2001 Dodge Neon

544 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...