...flywheel teeth Fig. 3: Be sure to lubricate the threads of the crankshaft damper bolt to obtain a proper torque reading Remove the crankshaft damper from the crankshaft by pulling it straight off the ...
...TORQUE SPECIFICATIONS. Using the Variable Camshaft Timing Oil Control Unit Setting Tool (303-654), rotate the variable camshaft timing oil control unit fully counterclockwise to the fully retarded ...
...Flywheel Holder Tool (J-39411) to lock crankshaft in position. Install intermediate shaft sprocket retaining bolt and torque to specifications.Route secondary chain for left cylinder head over inner ...
Question about Jeep Cars & Trucks
...flywheel. Remove the torque converter bolts. Remove the lower bell housing mounting bolts. Remove the A/C compressor mounting bolts. Remove the alternator and the lower idler pulley. Disconnect the ...
...torque setting MUST be replaced " You will probably find a belt at the front as well. IT does not state a time for the job but with the transmission out I would be looking at around 8 hours for the ...
Question about Toyota Cars & Trucks
...flywheel (automatic or manual) and not worry about the number of bolts; •Stiffening ribs were added to the block in '89. The ribs may interfere with the larger older style oil filter. Make sure the ...
1,441 questions posted
Usually answered in minutes!
1,309 Questions
1,122 Questions
857 Questions
783 Questions
480 Questions