has a tendency to say it is in 4wheel part time when I start it again even though the shifter is in 2 wheel and I usually cant get it back in 2 wheel unless I drive for a while in 4wheel full time and
...normal rotation. Backward rotation of the crankshaft may cause the timing belt to slip and alter the timing. Fig. 2: Timing belt assembly on the 2.3L and 2.5L engine (click image for zoom) Hope
...ford ranger Check this information out. It is more concise than any overt explanation you will receive: ...
...4x4 back brakes keep locking up had a mechanic look at them he said look ok. had them replaced 2 times in 2 years time. last feb was last brake job failed state inspection The proportioning
i was changing the spark plug wires on my 1992 ford ranger. one at a time.one wire came.i got mixed up i need to see a picture of the wiring from distributor to engine block what size engine! ill type
how 2 change timing belt 4 cly Remove timing belt cover to get to timing belt, it's not that bad, you will need a harmanic pulley puller.
why no spark #1 cylinder 1992 2,3 liter with 2 coil packs and 8 spark plugs fuel injected engine CRANKSHAFT TIMING SENSOR OUT OF TIME OR OUT OF ADJUSTMENT THROWING OFF TIMING.
...timing light and a 1/2 inch or 13mm wrench.1. Take a rag and clean the timing marks on the pulley and the timing cover. If you have any white out type correction fluid, you can also paint the ...
...2: Timing belt assembly on the 2.3L and 2.5L engine Fig. Fig. 3: Releasing the timing belt tensioner using a special tool Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. ...
Timing order on a ranger 88,2.9 liter .Firing order 1-4-2-5-3-6 --------front ' 1 2 3 ' of ' ' Distributor rotatesclockwise vehicle ' 4 5 6 '
927 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
558 Questions
477 Questions