...head bolts. 1)tighten to 40ft/lbs 2)back off 1/2 turn 3)tighten back to 40ft/lbs 4)tighten an additional 90 degrees 5)tighten an additional 90 degrees. STARTING OUT YOU HAVE TO REPLACE THE OLD BOLTS ...
...Tighten the idler or generator pulley fastener. 13 Start the engine and check the belt for proper operation. If you look down at the belt area, you will see a pully toward the front of the car that ...
...tighten all head bolts in sequence to the following torques: * All except bolts 5, 6, 11, 12, 13 and 14 - 100 ft. lbs.(19-135.5 Nm) * Bolts 5, 6, 11, 12, 13, and 14 - 41 ft. lbs. (19-55.5 Nm) * All ...
...Tighten the cylinder head bolts to 22 ft. lbs. Step 2: Tighten the cylinder head bolts to 43 ft. lbs. Step 3: Loosen the cylinder head bolts completely Step 4: Tighten the cylinder head bolts to 84 ...
...tighten the head bolts for your 1998 toyota sienna, hope this helps, 12 point bolts step 1- 40 ft lbs step 2- additional 90 degrees recessed bolt 13 ftlbs For 1998 Toyota Truck Sienna 3.0L EFI 6cyl ...
...100 ft LBS #5 BOLT 8 TO 10 AT 110 FT LBS . HEAD TIGHTEN SEQUENCE - standing at front ofcar bolts down left side are 8/4/1/5/9 bolts down right side are 7/3/2/6/10. left side meaning distributor
Head Installation for tightening sequence):Tighten in sequence to 70-90 Nm (52-66 Lb-Ft)Then back off all bolts 360 degreesTighten in sequence to 45-55 Nm (34-40 Lb-Ft)Tighten in sequence to 85-99 Nm
...Tighten bolts 12 through 14 to 110 ft. lbs. (150 Nm) ill see if the old head is same. it is. try alldata.com and stop guessing and digging up rumors or post what are the top , 5 reason for new gasket ...
head Hi there: Install the cylinder heads. Use new gaskets and tighten the bolts, in sequence, as follows:Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm)Step 2: Bolts 1-10 verify torque without looseningStep
Question about Dodge Cars & Trucks
...head bolt in a 2004 Dodge ram 1500 3.7 liter Install the cylinder heads. Use new gaskets and tighten the bolts, in sequence, as follows: Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm) Step 2: Bolts 1-10 ...
1,785 questions posted
Usually answered in minutes!
2,142 Questions
1,118 Questions
957 Questions
841 Questions
627 Questions