1998 Ford Windstar "join" Questions

How do you loosen seized original oxygen sensors in a 1998 Ford Windstar? use a torch to heat up the joint where it joins exhaust- use box end wrench and mallet- tighten a little first then loosen ...

How do I replace the horn. when I push on the horn nothing but when I use the alarm it blows Try pressing the middle of your steering wheel...or joining a band!----------------------------------------

...light switch at the top of the peddle that may have moved or wire come off. to test the switch just join the 2 wires together and brake lights should come on. hope this ...

Starter Ground ******** 98 Windstar Thanks for your description of the surge fix on the 98 Windstar. Mine does exactly the same thing. Surge with check engine light. Mechanic can make it go away. Now ...

...about eight feet, the dealer don't sell the lines, no auto repair have these lines and they want to join them is that safe to, or can you tell me where I can buy all of these lines, I would like to ...

Upper Rad Hose bulging when engine hot I have a 1969 Cutlass with a 455 engine. The car was running hot over 200 degrees so I changed the theomostat to a 185 degree. Problem went away. Heater core ...

...panel and re-solder the wire leads into the printed circuit board for the connectors which join boards. Ask a friend who is familiar with soldering electronics for help. Had the same issue ...

...alarm box down from under the dash (usualy cable tied)and follow all the black wires to where the joins have been made in the original loom.The original loom is color coded,cut the appropriate

change gasket on 2.5 shogun 1991 join the mitsubishi owners club, it takes 5 minutes to join and its FREE.....after joining, there is a forum section, in there someone will be able to send you a PDF ...

Why didn't you mention the COST first before I filled out to join???? I hate tricky people like this! Theresa Keysock You mean to join fixya??? It doesn't cost anything to join. Nothing tricky about ...