1998 Ford Windstar "cold exhaust pipe side" Questions

...exhaust pipe comming off the side of the engine there will be two up stream 02 sensors which are heated and one downstream past catalitic conveter. If may have the second style with the Y cross over ...

...cold before you start this!!! Remove the coolant filler cap and top up the coolant to the normal level. Start the engine. Does the water in the coolant filler tank behave really violently and try to ...

...the doughnuts and yet it still makes a loud puff puff sound With the engine cold, start and have your helper hold a bunched up rag over the exhaust pipe. You will spot the leak in seconds! ...

...exhaust gas recirculation and it to aid in cold starts and also emissions, it's usually at the rear of the engine to one side, hope this helps, it will possibly have a switch or plug coming from ...

...cold follow the air supply hoses to the exhaust check valves. The air pump is located by the heater box under the hood on top of fender well. The exhaust check valves are screwed onto the injection ...

...exhaust pipe and replace. Also wait until the car is cold as the surfaces under there will be extremely hot. CHECK FOR SENSOR PROTRUDING FROM EXHAUST CLOSE TO EXHAUST MANIFOLD . bank 2 is the front ...

...exhaust system a closer look. If you have someone that can help, start the car up after it is cold, and hold a rag over the end of the tail pipe, and see if the leaking are is more obvious. the ...

...cold side. They are in the exhaust pipes coming down from the motor under the car at the passenger side. Replace them with genuine Bmw parts. They are more expensive but you won't have any issues. A ...

...itself) or the linkage kit. The linkage is on the passenger side of the transmission between transmission and right side exhaust pipe. Ensure engine/exhaust is cold prior to trying to access.

...exhaust back to the engine. You need to make sure that this device will turn the shaft that the spring is connected to. The spring on this device is suppose to expand when it gets hot and then close ...