1997 Ford Explorer AWD "replace wheel bearings 97" Questions

...Wheel Bearings are very common on those vehicles jack it up and hold it on jackstands, grab the tire at 12 o'clock and 6 oclock, shake like push in at the top and out at the bottom and see if the ...

...wheel bearings and did fine for about a month then started shaking and grabing on the driver side only. Any help would be greatly appreciated Thanks It is usually the CV joints in the drive shaft(s) ...

replace the CV joint or remove it totally. But if your going to remove it, might as well wait till you have the replacement so you only do the job once. I had a Bad CV joint on a AWD Chevy van and did

...97 ford explorer w/automatic &married transfer case Most likely in need of a fluid change in the Transfer case and Diffs. Mine did the same thing. I had the exact same problem with my transfer ...

...wheel sometimes has more resistance in the brakes, bearings, or CV joints. This is normal) Step 3) Start the vehicle and let it idle in PARK. Engage 4high. DO NOT PUT THE VEHICLE IN GEAR!!! Crawl ...

...wheel bearing on a 97 hyundai elantra The front 'hub' bearing is 'pressed' out. You have to remove the steering knuckle from the vehicle and using a hydraulic press, replace the bearing by pressing ...

...noise coming from the front wheel driver side Ouch, get your wheel bearings checked. I had a 97 Hyundai and in the 3 years I had it, the front bearings had to be replaced twice and the rear once

...replace my front wheel bearing on my 97 dodge 4x4 with a standurd one without abs and just discounect the abs. as the price of a new one wit abs is 120 more than one without yea you can. but your abs ...

...Wheel Bearings 1994 Ford F150 2WD Pickup Part 5 How To Install Replace Front Brakes 93 97 Ford Ranger 2WD 1AAuto com Replacing Rotors with Tapered Roller Bearings EricTheCarGuy did u clean it real ...

...wheel bearing on my ford escort 1600 cc on a 97 plate and on putting it all together again i checked the haynes manual and it said that i should tighten it up to 192 lbs per foot and around 230 ...