2005 Nissan Sentra "remove engine" Questions

...Remove the engine and the transaxle as a unit. If equipped with 4WD, remove the engine, transaxle and transfer case together. Mark the hood hinge relationship and remove the hood. Release the fuel ...

remove the air cleaner & air inlet housing from the left side of the engine in order to remove the bolt heads to remove the starter from under the engine (from the bottom right side of the engine)

...engine then remove the one in the rear. Skipping the bolts in the four corners of the cover, remove the bolts from the front to the back. Remove the rocker cover bolts in the four corners. Loosen the ...

...Remove the engine's cooling fan by loosening the fan/water pump pulley nuts, unclipping and removing the fan shroud's lower half, removing the water pump pulley nuts and pulling the fan out from ...

...remove the engine. Review engine removal steps before proceeding as necessary. CAUTION When draining engine coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze and ...

...remove the radiator cap when the engine is hot. Serious burns could occur from high pressure coolant escaping from the radiator. To remove and install thermostat, refer to illustration and water pump ...

...remove! ) Get gaskets, sealants) and seals for replacement engine. ) Have a shop pump out the air conditioning fluid. (134a) ) Tie back the hood or remove it if it is in the way. ) Put the front of ...

...engine. Remove the upper engine mount bracket at the right side of the upper front cover. Remove the upper front cover. Align the timing marks on the camshaft pulley sprockets and then remove the ...

...Remove engine underside covers. 4. Remove engine front undercover. 2. Ensure lighting switch is OFF. 3. Disconnect the negative battery cable. 4. Remove the combination lamp mounting bolts. (See ...

...replace flywheel? well you have to remove transmission, axles,starter, an anything else that will be in the way of removing transmission. then the flywheel is attached to engine, it unbolts from ...