2005 Nissan Sentra "engine cooling system bleeder valve" Questions

Ad

...cooling system has no bleeder valve. Removing trapped air (bleeding) from the system is done by loosening the upper radiator hose with the engine running, and letting some coolant to ooze out. If the ...

Ad

...installation, reverse remaining removal procedure. Fill the cooling system. After installation, run engine for a few minutes and check for leaks. Hope helped with this (remember rated this) Good

Ad

Question about Nissan Sentra

2 Answers

...cooling system has several places with bleeder screws to purge the air out of the system. It is very important to do this otherwise the engine will overheat! A bleeder is located to the right of the ...

...cooling system can be pressure tested by nearly any competent auto shops and some auto parts stores will check them for free as well as test your radiator cap. Does the operating temp drop when you ...

Question about Nissan Sentra

1 Answer

cooling system. If you see any use them to remove trapped air. Start the engine and slowly turn the screw to remove trapped air. If there are no bleeder screws then remove the radiator cap from a cool

cooling system with the reservoir cap off while the engine is running? 2009 Dodge Charger 3.5 V6 SXT automatic Can I bleed the cooling system with the reservoir cap off while the engine is running? Do

...cooling system? Hello. To 'bleed' your Buick's coolant system, open the 'bleeder valve' then start engine. Let engine 'warm' to operating temperature. Add coolant/water to reservoir tank if needed as ...

...cooling system. To correct this fill radiator with engine still running and what bleeder till there is no more air and just coolant, close bleeder replace radiator cap and problem should be solved if ...

...cooling system. Are these the bleeders? And if so, how am I supposed to compress them? Those valves sound like fuel pressure test ports. Press down the center of valve and see if gas comes out. If it ...

...cooling system. It may not have one. With the engine cold remove the radiator cap. Make sure the radiator is full. Set the heater control to Hot. Start the engine and watch for escaping air bubbles. ...

Not finding what you are looking for?
2005 Nissan Sentra Logo

795 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...