...ABS unit is not operating properly even though the light does not come on. Sounds like maybe just rust on outside edge of rotors is touching on spindle slightly. Try removing wheel, and check rotors ...
ABS, wrench 2007 ford edge Three lights are on: ABS, wrench and traction control. What is wrong? it sound like a ABS-sensor is sticking are its bad give these websites a try www.alldatadiy.com and www
Question about Ford F-150
...edge abs and traction control light came on this morning and stayed on When i started the car the abs and traction control light came on on the dashboard and would not go off. I even hit the button ...
ABS/Traction and Turn Signal issue. Got an 01 PT Cruiser. While sitting on edge of parking lot and street, I heard a chime and then the Traction Control light and ABS light came on. Turn signal lights
...ABS light is a rotor that is no longer true i.e warped. Pull off the tire and rotate the rotor. Hold a straight edge (ruler) across the outside of the rotor as your rotating the rotor. You will note ...
...abs system is the same as a record turntable placed on it's side and located behind your wheel(s) behind your brake drum(s) On the edge of this turntable (disk) a series of squares or, stroboscopic ...
...edge abs and traction light is on Your ABS and traction control use the same sensors. one is probably knocked out of alignment or bad, and it takes special equipment to get them right. Take it to an ...
abs warning light came on It's either on edge of the backplate, or more likely inboard on the drive shaft a ring near the gearbox & diff. The rear sensor is located on the top of the differential
Question about Ford F-150
abs wheel sensor pick ups. ive had the same kind of problem on a car b4 and its been the pick up ring broken which u can see it goes around the cv joint.as i have never worked on a ford edge im not to
1,924 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,160 Questions
1,038 Questions
974 Questions
