2004 Ford Ranger "trouble code p0316" Questions

trouble codes PO304 and PO316. #4 plug and wire have been replaced. Do I need to replace ignightor coil? A code P0304 may mean that one or more of the following has happened: Faulty spark plug or wire

...trouble code p3016 on my 2004 Ford ranger edge 3.0 liter v6 I've tried new plugs, wires ignition coil, throttle positioning sensor and I've cleaned out the idle air control valve, replaced ...

Trouble Code Chart - RepairPal https://repairpal.com/obd-II-code-chart Feb 17, 2010 - Get definitions and auto repair information for thousands of OBD-II codes. Look up B, C, U and P codes to diagnose

...trouble code also, you should diagnose and repair that code(s) first. Symptoms Symptoms of a P0316 DTC may include: MIL (Malfunction indicator lamp) illumination Rough engine start or idle Potential ...

Trouble Code (DTC) P0306 means that cylinder # 6 is misfiring.  DTC P0316 means that cylinder #6 is misfiring bad enough that the computer has detected it within the first 1000 revolutions of the

trouble codes P0300B and P0316 i know one is a misfire and one is a lean bank i have done everything but change the fuel pump and injectors, could this be an electrical problem? Check your alternator,

...trouble codes P0305 and P0316. After the engine warms up the misfire disappears and the engine runs great. The trouble codes can be erased and they will not return until the next cold start. The ...

...may have a trouble code that states Bank 1 sensor 1 or Bank 2 sensor 2. Because that P0316 code is related to intial start up and not cyclinder specific i would be zoning in on your other codes

trouble codes p0430, p0301,p0316, p2195 and p2197. thecar is a 2004 lincoln ls 3.0 v6 with 116000 miles. can anyone help me solve my problem? PO-430 Catalyst System Efficiency Below Threshold (Bank 2)

changed plugs and wires code P0316 keeps poppng up Code P0316 P0303 Diagnostic Trouble Code Tableto fine what's wrong with the code p0316