2003 Ford Focus "abs sensor ring replacement" Questions

it comes as a complete unit with the front hub and the ABS sensor ring. so there is no need to press the bearing into the hub. Just remove the driveshafts, the rotors and calibers and replace the hub

...abs and traction warning lights to stay on The bearings on the wheels has to be installed one way only, the rotor ring is built into the bearing and if installed the wrong way round the sensor cant ...

...ABS Speed Sensor, ABS Pump, and left wheel bearing and the brake line on the left front of my 2004 AWD Mercury Mountaineer. My ABS light is still on after replacing the parts. Autozone does not look ...

...ECU has. The dealer should have the tool to read any ABS error code. If you are technically competent, pull the wheels off and check the ABS sensor ring and sensors for dirt and cable connections. ...

...stopped working after replacement of CV-joints. New CV-JOINTS does not have ABS rings.. what could be the reason need abs ring-- vehicle not reading speed --your abs sensors are also speed ...

...sensor reads for the abs braking system. my abs light would go on sometimes when i was on the highway. they claim they replaced both rear bearings and sensors. is this true there is a ring on the ...

ABS light on. Replaced brake pads, wheel sensor, and axle with sensor ring. Had it diagnosed and was told sensor ring on axle missing, replaced with new axle and proper sensor light still on trying to

ABS sensor out of range causing ABS light to come on and causing grind noise at same location. Grinding noise is probably rotor rubbing on calipar. Have seen quite a few fords that the abs ring cracks

...abs sensor and didnt solve the problem Had a similar problem with left abs. Garage eventually found that the notched ring on the CVJ was broken giving a false ABS reading (and warning light on). ...

...abs computer and it said it was the left speed sensor also. But ive changed this sensor 3 times. It fixes it for a while then a month or so later the same problem over and over... What should i try ...