front blend door actuator if it is working.The actuator may be working but the blend door is broken stuck.remove the dash console panel [ac heater panel and radio] you can see the door actuator.remove
...front heater is actually working, but the blend door is stuck shut by the failed actuator and is preventing the heat from reaching the dashboard vents. To get at the blend door actuator, you have to ...
...front of 2001 windstar van. Rear heat is fine. Thumping noise in heater blend door area. Replaced blend door actuator but still no heat, and still thumping. What can be wrong? Blend air door may be ...
...heater will only blow hot air out of the rear vents from the rear controls. The front vents only blow cold air. Is there a simple fix? blend door or temp contrl switch is bad. Section 12-02: Heating ...
...heater not working in the front of the van, but is working in the back? You might mean the 'blend door actuator'. It's not easy to get to. The correct way is to remove the dashboard. Search YouTube ...
...If the door is jammed, you may need to open the heater box to unjam. If it is free, replace the actuator. It looks like the actuator is right on the front of your heater box--see diagram
...front temp control is stuck in the 'cold' position this winter. Is there a way to manually move and fix the door to get some heat? you have to replace the blend (heat/cold) door motor, you can try to ...
front heater does not work 2000 ford windstar. my front heater does not blow hot air just cold air, but the rear heater does work, what can i do, i checked all my fuces and they are all ...
heater turned on. Symptoms: 1) When (engine is warm and) front seat heat temp slider is moved from full cold to anything with hot air mix to full hot, you can hear a door flapping back and forth under
2,720 questions posted
Usually answered in minutes!
1,830 Questions
1,503 Questions
1,212 Questions
1,032 Questions
600 Questions
