1984 Ford LTD "cleaned throttle body low idle" Questions

...pressure, dirty fuel injector, throttle body could need cleaning, dirty fuel filter, water in the fuel, spark plugs need to be replaced or re gapped. I need more information to try to be more

...throttle body bore and plate of any carbon deposits. Also, clean and check the IAC idle air control circuit . If it has electronic controlled throttle body it will not have the IAC. Carbon deposits ...

rough. just do induction / throttle body cleaning - will solve high idle on start up check for a vacuum leak. also the cold start sensor if is working. also clean the throttle body with a carb cleaner

...up, my corolla idles at 400 rpm,anybody know why? cheers adjust the accelerator cable. clean out throttle body,ajusting cable will only make it rev eratticly high throttle body needs cleaning,i had ...

...throttle body has built up gunk in it. When the power was lost from the blown fuse, the learned values in the ecu for idle were lost. After this the default values are used, which are too low for ...

THROTTLE BODY ASSEMBLY REMOVE IDLE AIR CONTROL VALVE AND THROTTLE POSITION SENSOR.BUY CAN OF CARBURETOR OR THROTTLE BODY CLEANER SPRAY CLEAN ALL CARBON BUILT UP AROUND THROTTLE PLATES AND BORE.LET AIR

...cleaned. The most effective way, is to actually remove the throttle body, and clean the throttle plate, and air flow ports, with a good spray choke cleaner. This is available at an auto parts store. ...

...after replacing the battery. Once I cleaned the throttle body, everything was fine. This happened at about 85,000 miles. Try cleaning the throttle body also check for vac leaks at the intake

f150 low idle how to reset idle Clean the Throttle Body with CRC Throttle Body Cleaner If you have an IAC Valve (idle air control solenoid) clean it first & see if that helps with the idle

...cleaned. this is what controls idleing on most vehicles now days. but do not put entire unit in any liquid. use an old tooth brush or similar to clean the carbon from it, also be sure where it mounts ...