2002 Ford Windstar Cargo "rough idle restarted hot" Questions

Ad

Rough idle/stall after hot soak 02 windstar Hi Has anyone had a problem with their 99-03 windstar 3,8 engine restarting it when its hot and has sat for 5-10mins? Mine starts then has a problem keeping

Ad

Question about Ford Windstar

2 Answers

...idle spray wires with water if enging runs rough shakes or stalls then replace the wires dont spray with to much water if the wires are real bad you may not be able to restart engine try this first ...

Ad

...rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion ...

rough when being restarted after reaching full operating temp.The hotter the ambient temp outside the worse the problem.The cooler the less.Engine will begin to smooth out and idle more normally after

...idle rough & run poorly.Restarting the engine will fix the prob..After awhile the problem returns. if it has  MAF & TPS sensors then clean with right cleaners and check air filter your ...

Question about Ford Windstar

1 Answer

...that it. This will solve your rough idle when every your AC or Defroster are on. The other lights, do they go off if you turn the car off and restart with the steering wheel pointing

...idle rough, stalls. Restart it and keep foot on gas pedal at low rpms to keep it from dying again. Once warmed up engine runs fine while driving and idling. Shut it off after engine h Have to crank ...

...rough when you go to restart when hot or cold it stumbles and has a hard time getting a stable idle . Sound to me like a bad EGR valve. Do you see black smoke if you try to give it gas whaen its ...

and restart while still hot engine has rough idle and power can only be maintained by feathering the gas peddle until problem eventually clears up. i would check the egr valve sounds like its sticking

Question about Ford Windstar

1 Answer

rough.Autozone had three codes, P0316, P1151, P1131. What should I do next? P0316 crankshaft position sensor, camshaft position sensor, or a wiring issue. Since this code indicates a start up misfire,

Not finding what you are looking for?
Cars & Trucks Logo

546 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Windstar
1998 Ford Windstar

1,830 Questions

2001 Ford Windstar
2001 Ford Windstar

1,838 Questions

2000 Ford Windstar
2000 Ford Windstar

1,503 Questions

1999 Ford Windstar
1999 Ford Windstar

1,212 Questions

2003 Ford Windstar
2003 Ford Windstar

1,032 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...