Question about Ford F-150
...converters three months ago. They were plugged up. I have checked the vacuum lines. Also put a new pvc valve on. The pvc valve smells of gasoline. Fuel rail stem core is seeping fuel even after ...
...consumption you've stated (assuming that there is NO oil leak externally) you need to check for a PVC valve stuck open due to carbon or paraffin build-up. A stuck PVC valve will definitely cause ...
where is the pvc valve on a 2004 ford f150 4.2 engine. is there more than one? there are 2 and they are located on top of the valve covers. one on each side.
...It is part of the exhaust system. i have never hear of anything call that i know the car has a pvc valve located on the top of the valve cover with a small black tube connected to ...
...filter, has 160,000 miles. Had plugs replaced 30,000 ago. Part stores say PCV valve not available. pvc valve is avaliable from dealer only. Do you know what the code is. That engine is known for ...
...die. Restarts ok. Isn't throwing any codes. I've replaced the egr valve, air filter, fuel filter, pvc valve and the plugs, The throttle position sensor [TPS] keeps the engine running when you stop ...
Truck Idle Having problems with the truck idle. Does not happen all the time. Vacuum leak. Replace PVC valve $10
Question about Ford F-150
What or where do you plug the pvc into the back into on a 95 F150 Passenger side valve cover near cab.
...6 The motor is also building up pressure and causing blow by is there a solution Check your PVC valve. It is suppose to vent the blowby. But if your rings are failing, then you will get a lot ...
Question about Ford F-150
...doing this. like idle speed control not working.check fuel pressure.scan it.check egr valve .check pvc.change plugs and wires.if it been a
1,066 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions