1982 Ford F 250 "wheel drive" Questions

Ad

...wheel drive quit working. It While driving, four wheel drive quit working. It stays in two wheel drive now and will not engage into four wheel drive, high or low. Check the fuse for the four wheel ...

Ad

Question about Ford F-250

1 Answer

...wheel drive not engaging I have a f-250 diesel, the four wheel drive will not ingage but the light is onsaying it is. When the four wheel drive is not engaged and the light is off ther is an ...

Ad

wheel drive, it is probably your wheel bearings. If it a four wheel drive, it could be the front differential, the joints on the axle shafts, the locking hubs, or the wheel bearings. On the four wheel

...wheel drive wont i have a 1996 ford ranger. i think its the auto hub locking. my 4 wheel drive wont engage but the light comes on and it makes an electronic clicking sound. also i switched it to 4 ...

wheel drive the front end starts poping as you turn. you can feel it in the steering wheel and hear it. Four wheel drive is designed to drive on grave or mud. You will always have a feeling within the

...wheel drive and 4 wheel low lights started to 4 wheel drive and 4 wheel low lights started to flash off and on then the overdrive light started to flash off and on Have vehicle's TCU/TCM scanned for ...

Question about Ford F-250

1 Answer

...wheel drive noise vibrating or knocking noise when 4 wheel drive is engaged Where does he noise come from? is it coming from the hubs on either of the front tires? Is it coming from under you in the ...

Question about Ford F-250

1 Answer

...wheel drive switch will not work sometimes up to 10 attempts going from 2 wheel drive to 4 wheel drive and then back to 2 wheel drive from 4wd. At times the vehicle will not go back to 2 wheel drive ...

Question about Ford F-250

1 Answer

wheel drive won't engage I have a 2001 F250 Super Duty. Auto locking hubs won't engage so I tried switching manually into 4 wheel and it still doesn't work. I had my front u joints replaced at a local

wheel drive. i have replaced the vacuume pump and the solinoid (they were bad) I have no power to the switch in the dash. i have located the large square fuse and it is ok. i can't trace it from there

Not finding what you are looking for?
Cars & Trucks Logo

178 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...