...switch are useually all one piece, Called a combo switch, They are known for going bad Check both "flashers" theres one for the turn signals and one for the hazards. Common part on the 89's to go
...89 ford ranger all lights work except brake lights. I replaced the switch, fuses are good and so are the bulbs. What else could be causing the brake lights not to work?? It could be the turn signal ...
...89 ford ranger that i cant get the fuel pump to run. i jumperd after the relay and from after the relay the pump runs. i cant get tghe relay to work at all and i even put a new one on. Hi, if the car ...
Question about Ford Ranger
...turn on very easy at the slightest touch and all you need to do is rest your hand on the set accelerator button and it's off to the races/////// if not try cleaning all your emissions connectors and ...
89' ford ranger will not pass smog here in socialist california. it has passed for 15 years since i've had it. the new machines indicate that the check engine light is'nt operating. i don&
...89 Olds Ciera, and when the turn signal quit working ( bulbs did not light at all) I change the flasher, and they work fine. I found the flasher behind the ashtray. Of course I had to remove the ...
Question about Ford Ranger
...89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem i have 89 bronco 2 my brake lights turn signals both work my tail ...
Question about Ford Ranger
...turn signals, and radio I have a 89 jeep wrangler and I cannot use my headlights, turn signals, and stereo at the same time without my electric going crazy and shutting off my engine. With only the ...
89 Chevy 1500. Break lights and rear turn signals quit working ... I'm clueless. Help? Since power from the brake light switch goes thru the turn signal switch, have you checked the turn signal ...
...89 accord. Turn signal, tachometer, fuel and temp guage stopped. Fuses ok, replaced turn signal and hazard relay. Should I replace the turn signal switch next? you should pull out the gauge cluster ...
671 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions