i have a 1989 ford ranger five speed manual 2.3 liter 4 cyl i am haveing problems gettin it to go into gear and the clutch is also in the floor but if i turn the truck off it will go into gear and if ...
timing belt broke ,just replace it but it won`t crank.it sounds like electric priblem Only the 2.3 liter diesel is an interference engine. The 2.3 Liter gas is not an interference engine. I would ...
Question about Ford Ranger
...2.5 diesel pump timing marks - Fixya www.fixya.com/.../t12609400-ford_ranger_2_5_diesel_pump_timing_... Apr 29, 2012 - SOURCE: need the timing marks for a 3.1 td 5 cyl diesel injectionpump. isusu ...
...2.8 v6. When removing my distributor I neglected to mark it.. Now my timing is off. How do I solve this??! Turn your motor by hand to bring up TDC #1 fire. Set your distributor in place. Remember it ...
...easily and some times not at all. Any suggestions? 1. Your clutch may be worn or out of adjustment. 2. If it is a hydraulically activated clutch it may be low on fluid. 3. Possibly the synchronizers ...
...gears there is a light clunking noise similar to gear backlash coming from the drive line. To me it sounds like its coming from the transmission. It not only does this after shifting, but also while ...
...on Park, leave engine running and check your transmission fluid level. Most likely will need about 2 qts. If you check the fluid level with engine off and cold, the reading will be inaccurate. Have ...
...checked that crank & oil pump gear were correctly timed still recieving 340 code. truck is a 97 2.3 with 267,000 + runs great. I did replace the timming belt 2 years ago @ aprox. 175,000 cause I ...
Question about Ford Ranger
87 ranger bogging problem while stepping on the gas+tranny issue Usually does it in either 2 or 3rd gear not sure if that makes a difference, shakes my truck pretty bad, and doesnt accelerate. It does
671 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions