1989 Ford Crown Victoria "remove gas tank sending unit" Questions

Ad

...gas tank electrical connector by the tank. Pull it apart, and on the harness side of the connector, locate the wire going to the sending unit. I don't know what color it is, but the fuel pump wire is ...

Ad

...work when u put gas it stays on E can some 1 please help me with this problem. thanks Remove fuel tank and replace sending unit.. May as well do fuel pump while your there, and change the fuel

Ad

Question about Ford Crown Victoria

1 Answer

...This problem is caused by a defective gas gauge sending unit inside the gas tank, to change the sending unit requires that the gas tank be removed from the car to access the gas gauge sending

Question about Ford Crown Victoria

1 Answer

...gas gauge sending unit (senses the level of the fuel in the gas tank), the gas gauge sending unit is located inside the gas tank, the gas tank must be removed to replace the gas gauge sending

...gas tank of a 1993 jeep laredo No but you need to drop the tank and remove the retaining ring that holds the fuel pump and sending unit in.Replace the pump as well the cost is'nt much difference. ...

remove the screws or bolts. Some sending units are a "twist-lock" type. They work like the old twist-lock gas caps. You'll see a few notches along the outer ring of the sending unit. Place the tip

Question about Ford Crown Victoria

1 Answer

tank is full this problem is caused by a defective gas level sending unit, the sending unit is located inside the gas tank, the gas tank in most cases must removed to replace the gas gage sending unit

Question about Ford Crown Victoria

1 Answer

...or something in the gas tank? It is possibly the fuel gauge sending unit inside the gas tank, there is no way to check it unless the gas tank is removed and the sending unit removed from the

Question about Ford Crown Victoria

2 Answers

Remove gas lines. Remove support strap. Then with tranny jack and a helper, remove gas tank support bolts and lower tank. Now on top of tank you will see the cap. You will need to use ONLY BRASS punch

...gas tank sending unit is accessed through the back seat, remove the cushion and then the plate under it, make sure the tank is at least half empty or you will fill the car with gas when the old ...

Not finding what you are looking for?
Cars & Trucks Logo

250 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...