1988 Ford Mustang "click wheel wont work" Questions

...after tapping starter start car if that does not work another simple possibility is the steerwheel lock, with ignition on off possition turn steering wheel, listen for click, then turn key to

...wont turn either direction-steering wheel locked to the right-tried manipulating steering wheel while turning key to no avail. when i try to put car in neutral (pushing shift button on stick) hear ...

...wheel wont turn? im stumped cause the truck always drive fine it has oil everything works. it never made any noises or vibrations or nothing. just cant understand how it drives great i park it then ...

...click? good luck I found my cable on my starter was a little loose after the dealer did some trans work. The starter is on the rear of the engine on the drivers side. The only way to tighten the nut ...

wheel high light blinks back and forth for a couple of seconds.also it sounds like some kind of clicking noise coming from the switch.but it wont go into low or high. thanks for any help you can give.

...click under the steering wheel but they wont lock or unlock all the way. Tried resetingthe CPU via the remote, by holding down lock and unlock, horn chirped still no lock functions. help! All four ...

...wheel drive but wont shift out it just keeps clicking in the dash and under the truck second problem is when its in four wheel drive it make kind of a clicking grinding noise when you turn and when ...

wheel returns back to position, they dont click off on there own. What is the part that is causing this? switch or something? Probably not a switch problem. Most turn signals are reset via a mechanism

...wont work Have the push button 4x4 on my 2000 Jimmy. You can hear the click when you put it in 4hi and 4lo and the vehicle will lurch forward when put in drive but the front wheels will not pull/turn ...

...click when i selectlo high or off. on some of these 4 wheel drives if you are rolling slowly and shift to neutral while rolling, the desired settings will work..most are supposed to work on-the-fly- ...