2006 Ford Crown Victoria "p2104 p2111" Questions

Ad

Question about Ford Crown Victoria

1 Answer

...p2104,p2111 was going down the road wrench light came on and it died. you can unplug either the tps or the throttle actuator and it will start but run bad and only idle code p2106 refers to throttle ...

Ad

...P2104 - Throttle Actuator Control System - Forced Idle P2111 - Throttle Actuator Control System - Stuck Open So I attempted and completed the following repairs with the help of some good friends that ...

Ad

p2104 p2111 washed engine yesterday, can and drove car for over an hour, parked last night, started up this morning, ran for 4 min and stalled. started it up again and stalled. no throttle responce at

Question about Ford Crown Victoria

5 Answers

...P2104-P2111-P2112 P2104 Throttle Actuator Control System - Forced Idle P2106 Throttle Actuator Control System - Forced Limited Power P2111 Throttle Actuator Control System - Stuck Open P2112 Throttle ...

P2104 Throttle Actuator Control System - Forced Idle P2107 Throttle Actuator Control Module Processor P2110 Throttle Actuator Control System - Forced Limited RPM P2111 Throttle Actuator Control System

...P2104, P2111, and P2112 the engine failure mode appears car wont move turn it off and on again and its fine with just the check engine light Happens several timesaday now all the codes point to ...

p2104,,,,,,,,,p2111,,,,,,,,,p2135,what do these codes mean,2006 ford explorer ltd Follow this link, hope it helps. Good Luck. http://www.fordf150.net/forums/viewtopic.php?t=49449

Question about Cars & Trucks

1 Answer

codes p2111 p2112 p2104 have cleaned valve body also changed lots of black carbon built up intake ? Make, Model and year.

...p2104 p2111 washed engine yesterday, ran car for over an hour and driving it around, parked last night. went to start this morning, ran for 3-4 min and stalled. go to start it and starts, but then ...

Question about Cars & Trucks

1 Answer

...p2104,p2111, what do they mean? Lean bank 1 and bank 2 , and throttle actuator system fault. Check reason for lean codes 1st, vacuum leak(s), air inlet boot and hoses, or low fuel pressure / clogged ...

Not finding what you are looking for?
2006 Ford Crown Victoria Logo

210 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...