torque specs are from the Haynes manual (Ford pick-ups 97' - 03') This is a 2- step proccess. step-1 44-in-lbs step-2 89-in-lbs. There are 14 bolts that hold the manifold in place, tightening sequence
torque specs intake manifold 97 f150 4.6 stage 1- 4 ft/lbsstage 2- 8 ft/lbs
torque specs head need to know the torque specs for the head on a 97 dodge avenger 2.0L HO Long bolts 48ft,lbs+1/4turn. Short bolts 20ft.lbs+1/4turn. 2.5L V-6 SOHC 76-83ft.lbs
...out bearings. Need engine crank mains torque spec and also the rod bearing cap bolts torques? http://www.pdfstock.com/d/1997+dodge+caravan+specs this link will have the pdf file for your
Need torque specs for connecting rods on a 3800 Series II engine in a 97 Pontiac Bonneville SE the rod bolt torque spec is 20 ftlbs then additional 50 degrees
torque specs and sequence for 97 dodge 2.4l stratus need torque specs and sequence for 2.4l engine for which procedure? i recommend spending the 10-15 bucks for a service manual. 90% of the questions ...
Flywheel torque specs for 97 dodge 3.0 engine Use your search engine to find torque specs for sae fine thread bolts, find your size by thread diameter, my guess is 85 lbs.
110 foot lbs . Am i wrong i dont believe so. Why you may ask because the important things like rods and mains are still being done with torque specs (a hard number) its been done this way for decades
97 F250 HD Rearend axle bearing retaining nut Torque Spec for used bearings. It is 10.25 sterling rear gear w/ 7.3L diesel eng. Axle retaining nut torque spec is 55 to 60ft lbs. back off 5(new) or ...
...torque specs for leaf springs and u bolts for my 97 ford f250 heavy duty 4x4 just tighten them up i dont use torque specs for that then drive it for about an hour or two and check them that will give ...
1,829 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,038 Questions
974 Questions