1997 Ford Contour "hydraulic pick" Questions

pick up lean bank codes. aWhat you need to do is have the vehicle on a level ground engine warm vehicle in park check the transmission fluid,A low transmission fluid does and will cause a hard upshift

...GMC full size pick up truck have a hydraulic clutch No. They started doing hydraulic clutches in late 1986. The 1982 has a clutch fork and throw out bearing if it is still the original style

...pick up truck as i understand the set up the hydraulic clutch needs no adjustment as is compensated for wear by the slave cylinder design hope this is of some help No adjustment. Hydraulic slave ...

...Pick up truck took car back to the garage which fitted the clutch 4 weeks ago.Gearshift had been smooth until today. Sounds like air has gotten into the hydraulic clutch system, or it is low on fluid ...

...pick up. It won't go into gear right. You need to fix the Leak in your hydraulic system to your clutch on your transmission. The reason that your transmission is not going  in to gear right is ...

...Pick-Up-6.5-6.8 in. (164-174mm) 1987 Trooper II-9.1-9.5 in. (231-241mm) 1985-86 Trooper II-8.12-8.51 in. (206-216mm) the above is free play cable on all of these cable cars. so yours is Hydraulic, if ...

...pick-up If the clutch is hydraulic operated, you need to bleed the clutch at the slave cylinder, down on the transmission housing. Bleed it just like you bleed brakes of air in the line-open bleeder ...

are very expierienced in doing this went to iraq any suggestions you need a special tool to disconnect the hydraulic line from the slave cylinder, you should be able to pick one up at your parts store

...pick-up 4x4 The linkage cable before the trans should have an adjustment nut on it. This controls the fork assembly movement. adjust the linkage to remove the pedal free play and this will also ...

...pick up very fast but the car doesn't have any torque could my clutch be the problem perhaps indicates a clutch BUT the place to check first is the clutch master cylinder if hydraulic or the cable if ...