2000 Dodge Ram 1500 Truck "bypass low pressure switch" Questions

Ad

Question about Dodge Ram 1500

1 Answer

...low pressure switch or even a bad compressor. By pass both pressure switches one at a time with small wire or a paper clip. If comperssor kicks on replace the swich that you bypassed. if not it could ...

Ad

...bypass a lowpressure switch on a 2003 kia sedona Bypassing the low pressure a/c switch can cause damage to the a/c compressor. A basic low pressure switch (two wires) can usually be bypassed by ...

Ad

Question about AC Cars & Trucks

1 Answer

...If pressure is good but bypass works, you need a new pressure switch. If pressure is low, charge the system. If pressure and presxure switch are good, please get back to me and I'll do some

Question about Dodge Ram 1500

1 Answer

...no good. Relay will not engage if pressure switch thinks freon is low. This switch does sometimes fail. If you are sure freon is ok, use jumper wire to bypass low pressure switch and see what

Question about Dodge Ram 1500

1 Answer

bypass the Low pressure cutoff switch. If the compressor works better and does not cut out, it can still be low on Freon or have a bad Low pressure switch. However, if the compressor cuts out a Second

Question about Dodge Ram 1500

1 Answer

...Dodge Ram Mega cab. A/C not working, Compressor Clutch will not engage. Will not except Freon 134A. Do I need to run bypass on high pressure switch? more like run a bypass on the low pressure ...

...bypass the low oil pressure switch on a 1986 chevy suburban 4x4 k20? replacing electrical pressure switches with mechanical. the oem oil pressure set-up has 2 switches...1 for pressure...1 for i ...

...bypass the low pressure sensor and allow the AC clutch to engage and begin to cycle again. Remember this low pressure switch is there for a reason. If you don't add more r-134 to the system and allow ...

...low pressure switch. Run the A/C with this bypass and observe the A/C lines. If the lines now freeze, then the low pressure switch is bad. The low pressure switch may be replaced without discharging ...

LOW pressure switch does not make the system get power.  Only, really only bypass the HIGH pressure switch with the clutch connector disconnected.  The HIGH switch is there to prevent damage

Not finding what you are looking for?
Cars & Trucks Logo

1,053 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...