2003 Dodge Durango "4 engine cylinder head" Questions

Ad

Question about Dodge Durango

1 Answer

...4 cylinder engine, then you will usually have only 8 valves. The only way that you could end up with 32 valves, is if you have a dual overhead cam, v-6 engine. Each head will have two cams, and each ...

Ad

...compression on all 4 other side. Ideas? That is an overhead cam engine - a separate cam on each cylinder head. Remove the valve cover on the side with no compression and see if the cam is

Ad

Question about Dodge Durango

1 Answer

...4) connecting EGR tube (1) to valve assembly. Remove gasket located between EGR tube flange and EGR valve assembly. Remove two EGR valve mounting bolts (5). Separate valve assembly (3) from engine. ...

...engine, the cam position sensor isn't immediately visible, as it is integral to the distributor. If you have one of the 4 cylinder engines, it's located at the rear of the cylinder head on the ...

Question about Dodge Durango

2 Answers

...4 o'clock and 8 o'clock). Once the secondary timing chains are installed, position special tool 8515 to hold chains in place for installation (Installing Secondary Timing Chains on Idler Sprocket). ...

Question about Dodge Durango

2 Answers

...4 inch to block of engine, if so cable and coil ok .remove spark plug and compression test , if plug and compression ok refit plug, start engine and back probe injector with led test light, if ...

...engine has 8 plugs and intake manifold dodge 4.7L (I have the cut down to 3.7L here i my garage) here is what google can do (or brave) see the gold color plugs here. 1seconds work to find, done ...

...engine!!! i am stumped Aloha We have just replaced all of what you have replaced, plus water pump, fuel pump, pcv valve and 02 sensor. Took it to mechanic today we had misfire on 1,2,6,7. Mechanic ...

Question about Dodge Durango

1 Answer

...4 8 ' front ' ' ' 7 3 1 5 9 ' -----------Step 1: torque in sequence to 51 Ft/Lbs Step 2: torque again in sequence to 51 Ft/Lbs Step 3: final tighten all bolts an additional 90 to 100 degrees recheck ...

Question about Dodge Durango

2 Answers

4 cylinder engine the cylinders are numbered 1, 2, 3, 4 starting from the front of the engine and the firing order is 1, 3, 4, 2. For the 3.1L 6 cylinder engine the cylinders are numbered 1, 3, 5, for

Not finding what you are looking for?
2003 Dodge Durango Logo

1,157 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2001 Dodge Durango
2001 Dodge Durango

1,378 Questions

2002 Dodge Durango
2002 Dodge Durango

886 Questions

2004 Dodge Durango
2004 Dodge Durango

1,005 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...