1988 Dodge B250 "318 distributor cap" Questions

...318 You have a hall effect pick up coil, it is in the distributor, under the rotor-it has a 4 wire harness that comes out of the cap and plugs into a harness-the pick up coil just lifts out, easy

...318 tbi... pulled codes from ecu... results= 12, 21, and 55. Fuel system is very rich causing flooding and stalling. I would appreciate any input you can provide. I also had a problem where the ...

...318 4x4 distributor firinng order wiring diagram ram 1500 318 engin 1998 1-8-4-3-6-5-7-2 Clockwise rotation. #1 should be marked on the cap. GO TO THE LINK BELOW FOR INFO U NEED. ...

...distributor cap. Car is a 1988 Dodge 318 ci TFI. How to find the #1 post on cap check out the link for the firing order. Lots more on the Images tab. Number 1 on the distributer cap is at 11 o'clock. ...

...318 no fire at spark plug, will not start I have replaced pick up coil, rotor and distributor cap. Have voltage going into distributor cap but no spark at plugs. did you change the main coil and coil ...

...318 #1 is at 6:00 o'clock on the distributor when you are looking at it from the front of the car. It turns clockwise and the firing order is 1-8-4-3-6-5-7-2. Odd cylinders are on the driver's side ...

...distributor cap on 1979 dodge 318 please send picture of cap and the rotation of #1 #2 etc clockwise- counter clockwise? V8s are 18436572 going clockwise number 1 should be marked on cap or closest ...

...318-1 engine answers The firing order for a Dodge 318cid/5.2L is 1-8-4-3-6-5-7-2 clockwise rotation. Cylinders are numbered like this. Pass side 2-4-6-8 front to rear. Driver side 1-3-5-7 front to ...

...318-1 I have lost the information that shows where to connect the spark plug wires from the engine into the distributer cap For this you have to determine when the #1 cylinder is at TDC (Top Dead ...

...318. Can I get a picture of the firing order on the distributor? The firing order is 1-8-4-3-6-5-7-2. I'll try to find a pic of the distributor layout although number "1" is usually embossed on the ...