1987 Dodge Ram Maxivan "oil pump replacing" Questions

Ad

...oil pump in a 99 dodge ram the gauge keeps going to low when I come to a stop and then when I take off it goes back up. Before replacing the oil pump, please do a mechanical oil pressure test to ...

Ad

Question about Dodge Ram

1 Answer

oil pressure gauge erratic I had the same problem a while ago, I fixed it by replacing the oil pump. You will need to purchase the pump, oil pan gasket, and of course oil. That should do it.

Ad

...OIL PUMP WAS BAD AND THAT I WOULD HAVE TO REPLACE IT. I AM WONDERING IF IT IS THE OIL PUMP OR SOMETHING ELSE. HOW CAN I TEST THE OIL PUMP TO FIND OUT IF THIS IS THE PROBLEM OR NOT. You can put a ...

...oil pump? where is it? or is this a cloged oil filter? thank you. i would install a new oil pump. it is located in your oil pan and at the same time replace oil filter and oil. that should take care ...

...oil pump is worn so that, through internal leakage, it cannot keep up with what the engine requires at idle under normal condition, then when adverse conditions arrive you could suffer oil-starvation ...

Question about Dodge Ram

1 Answer

...I recently change out my oil pump on a 5.2 L engine only to find that I had a faulty switch. The switch for a 5.2L is only 16.99 at autozone and is less time consumming than replacing the oil

...oil pump on 99dodge ram van 3500 how do you replace oil pump on 99 dodge ram van 3500 5.9 v-8 that's internal engine repair so if you are not a mechanic you probably want to take this to a ...

...be a bad oil sending unit, or bad bearings they have alot of problems with oil pump screens and pumps take the oil pan off and you may see the screen stoped up but i would replace pump and screen ...

Question about Dodge Ram

2 Answers

...oil pressure if its good replace oil pressure switch/sensor Pull the sending unit, hook up a manual oil pressure gadge, 20 to 40 lbs. If so, bad sending unit, If not, bad oil pump, or bad

oil pump makes 8-10 Psi at idle. Always mechanically test that no MATTER what. But the sending unit needs 12-14 psi to read it. So what happens is the engine warms up, and the oil thins. Then you come

Not finding what you are looking for?
Cars & Trucks Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Dodge Ram
1999 Dodge Ram

1,788 Questions

1994 Dodge Ram
1994 Dodge Ram

197 Questions

2004 Dodge Ram
2004 Dodge Ram

173 Questions

1998 Dodge Ram
1998 Dodge Ram

142 Questions

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...