...temperature gauge not working If the temperature gauge in your 2001 Ford E150 cargo van is not working, there are a few potential causes: Faulty temperature sensor: The temperature gauge in your van ...
...temperature gauge requires a 'variable resistance type' temperarure sensor to control the meter deflection. When cold the temperature sensor is of high resistance, hence less meter deflection; when ...
...temperature gauge and make sure they haven't torn or ripped. If that doesn't help, then check/replace all the sensors which relate temperature to the gauge, ie: air temperature sensor, coolant ...
...temperature gauge sensor is a temperature-variable resistor, or thermistor. As coolant temperature increases, the resistance of the sensor decreases or decreases, depending on the type of sensor. A1 ...
Question about Dodge Ram B250
...temperature gauge Where is the temperature sensor located on a 2001 Ford Focus zx3 that operates the temperature gauge inside the car? The ECT (Engine Coolant Temperature) sensor, for the coolant ...
...temperature gauge no longer functions, or there is a break in the temperature gauge wiring. You can locate the temperature sensor/sending unit turn on the ignition and ground the wire to the ...
Question about Dodge Ram B250
...hole above it is where the sender goes,it's a one prong part,the sensor is a 2 prong part.A lot of people don't know that there are 2 types of coolant temperature gauge sending unit and
temperature gauge not working,stay cold temperature gauge reads cold after motor is wsrm,have 5vdc at the sensor,grounded sensor wire ,no change.. gauge? Hi. the vdc at the sensor seems to be fine. if
Question about Dodge Ram B250
...temperature gauge . The temp sensor controls the fan operation and the CPU operations while the temp gauge sender unit is a heat controlled resistor that alters the voltage through the gauge. check ...
...temperature sensor circuitry-- is there a relay in this circuit? The temp gauge does not work-- we have replaced the sender unit--checked the gauge itself and the fusing and both are OK.--tried ...
49 questions posted
Usually answered in minutes!
2,271 Questions
2,049 Questions
1,788 Questions
1,616 Questions
1,496 Questions