2006 Ford F-150 "change rear springs" Questions

Changing the interior map light The bulbs is replaced from the back of the overhead console with 1/4 turn bulb holders. the overhead console ( non rail version ) is held up with spring clips. Open the

...change cab interior map light Open the rear compartment ( on the non rail overhead ) grab and pull down in each rear corner. The overhead is held on with 4 or 6 spring clips. Once you have the ...

...was told that the front can only be lowered by 2''( i believe there is a 4''spacer in rear) i would thinks so or you would have to buy drop spindles for the front to compensate for the change in ...

...change interior dome light 2004 ford f-150 For the none rail system front console ( where the map lights are at ), open the rear compartment, and grab each rear corner, and pull down hard. It is held ...

...change rear axle seal on 2004 ford f150 4x4 5.4 litre triton Block the front tires. Break the rear lugs loose. Jack up the rear of the truck at the center if possible. remove the wheels & brake ...

...rear main seal is leaking in my Ford F150 pickup need to know how to change it One thing you may want to try especially if you don't have a heated garage is a bottle of Bar's leak rear main sealer. I ...

...change out the dome lite on my 2005 150 king ranch For a 2005 MY F-150 : The rear ( if SCab or SuperCrew ) there is a little notch in the lens that is used to push in a tab and lower that side, slide ...

...springs on the right rear side. Any information would be appreciated in helping me find a solution to this problem. You would want to check the rear seals & bearings and the differential to make ...

...springs, position of the shoes, etc. (You know that the left and right are mirror images of each other, as you look at each assembly, think "front vs. rear" not "right vs. left" Are the shoes pulled ...

rear axle removal on a 2004 f150 fx4 rear axle and seal removal on a 2004 f150 fx4 First thing is to make sure you chock the front tires so the truck will not roll. Raise the rear end and set it on ...