...Dan more often then not ,whats happen is the wiper arm is loose on the motor shaft. with the wipers turn off see if its possible for you to move the rear wiper arm by hand ! if so its loose now ...
Question about Chevrolet Cars & Trucks
...arm. How do I reinstall the new bushing? The new bushing seems just a tad to big to install. Hi Dan: If you have a micrometer (fancy word for a very accurate measuring tool) you could check, BUT, the ...
...splines are well engaged/fitting before tightening arm bolt Sorry for my english Hope it will help ...
...arm control on 99 gmc jimmy but it still looks one of my frontside iz lower dan the other wut could it be? Have you checked the torsion bars to see if they can be adjusted ? The shock only dampens ...
...arm is left on and not moved, ensure the car is turned off also. Do you need further help? Regards ...
arm suspension failure, it is basically a rubber mount that aligns the front wheels, when these go there is to much movement as these normally absorb the excess. Hope this helps Regards Dan Please see
...Dan...I poked them in the arm for you and they will contact you ...See Below: Dear wfservices, Thank you for bringing this to our attention. We have answered this Expert. Regards, FixYa Staff Dear ...
...it could be brakes but you can normally tell with the smell from brakes. Hope this helps Regards# ...
...put it on the center tensioner pully arm. now with the belt on except for the alternator torque the ratchet pulling the tensioner pully giving you enough room to put the belt on fully. ~Dan
arm on a 1998 Honda 4-door DX? Will the nuts come off hard? Does the spring have to be compressed? Can a do-it-yourselfer do it? Thanks, Dan Not that bad, just a couple of bolts to disconnect from the
1,260 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions
