...blend door actuators, you have 2, one behind the radio and one on drivers side inside back panel, also check fuses,but i fixed my heat problem with the 2 actuators, not hard to do but does take some ...
...blend door and the linkage for my son,s 2003 Lancer. I will be doing the job in about a week. I am a professional auto repair tech with 38 years experience. I would not recommend doing this job ...
...blend door too as the pins are susceptible to breakage also. it is best to get a book for your specific vehicle. Haynes ,Chilton books are widely distributed through auto zone ,checker ,pep boys. I ...
...blend door motor is faulty, its not opening the door to let the air move out.----- Getting this possibilities checked will help.Thanks.Helpmech. Blower motor working ok?> how did you go about ...
...blend door actuator - Looking in through the radio opening, locate the actuator module - a white plastic unit about the size of a pack of cigarettes. Use the nut-driver to remove the three 5/16ths ...
...auto-parts, etc etc and buy the right tool) Disconnect the two wire connectors from this panel and put it in the back seat out of the way. remove the screws along the bottom of the glove box and then ...
...auto, temp, setting, defrost, floor or panel vents.... nothing maters as long as its i got the ac going it does this the clicking is caused by a part called a temperature control ac/heater blend door ...
3,753 questions posted
Usually answered in minutes!
3,749 Questions
2,055 Questions
1,226 Questions
897 Questions
840 Questions
