1996 Dodge Neon "proper timing cams belt" Questions

Ad

...proper instructions and may have damaged the valves as this is an interference engine. Extreme caution when replacing the timing belt on these engine is critical to avoid internal damage. First thing ...

Ad

Question about Dodge Neon

1 Answer

no fire @ coil Replaced wiring harnss/underhood. Rplaced pcm. replaced coil pak. I still have nothing . After replacing all those componets the car cranked and ran great for about 5 seconds . nothing ...

Ad

Question about Dodge Neon

1 Answer

...Timing belt on a 1999 Plymouth Neon 2.0 Single Overhead Cam Engine. Engine Cranks, Is getting Fuel...but no spark. We changed the Coil Pack. It still cranks, but no Engine Start. We would love a ...

timing belt is not broken as I can see the cam turn through the inspection plug. I tried changing the wires, plugs, coil. I have changed the fuel pump and relays in fuse box. Swap fuel pump relay with

...timing belt is on and working properly, we are running outta options real fast, any help would be great right about now. The engine turns but does not fire, what are we doing wrong??? YOU NEED TO ...

...timing belt pulley mounts on the other end of the cam shaft. So it is on the right side of the engine while you are facing the vehicle just under the valve cover on the side of the head. Your air ...

Question about Dodge Neon

1 Answer

Timing belt and timing belt tensioner Camshaft sprocket(s) Inner (rear) timing belt cover Water pump and discard the O-ring Clean all mating surfaces of any residual gasket material. To install: Water

...exact or you will not get proper performance. There is no way for the ECM to change the ignition timing enough to overcome a misaligned timing belt, although it may be able to get the engine to

timing belt or water pump....if this is the caes and you have to time it again. What happens in most cases is when cams and crank are in there proper position when tightening the belt eiter one of the

Question about Dodge Neon

1 Answer

timing belt covers and front plate that attaches to the upper motor mount arm from the motor, it's a tight fit, Remove the Valve cover and follow the proper removal sequence for the head bolts. DO NOT

Not finding what you are looking for?
1996 Dodge Neon Logo

534 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Dodge Neon
2002 Dodge Neon

861 Questions

2004 Dodge Neon
2004 Dodge Neon

762 Questions

2003 Dodge Neon
2003 Dodge Neon

743 Questions

2005 Dodge Neon
2005 Dodge Neon

710 Questions

2000 Dodge Neon
2000 Dodge Neon

606 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...