2005 Dodge Ram 1500 "back firing intake" Questions

...to back fire through intake manifold whts the problem Did you get the oem parts from the dealership? If you got cheap ones at the auto parts store that is the problem. Now you have to buy them

...hyw speed and back fire through intake If not located to a particular cylinder to fuel, or spark problem, then maybe it is the time for a new timing chain, and sprockets. I would check the timing

...undesirable noise from intake.back fires Sounds like something has slipped timing, camshaft most likely. If timing belt slipped, replace and set timing properly. Hopefully, valves did not get

...pack what else could it be shoot some carb cleaner into the intake ( or through a vacuum port) and try to start. If it will run for a second or two then you have a fuel delivery problem. Report

...firing order is key to the resetting the timing. Look on top of the intake manifold. It should be listed there. If not look in the owners manual. Typically, the order is 18436572. The cylinders are ...

...to the back of the intake right near the fire wall and it has a 90 rubber elbow that can rot out and give you a leak check it out that might be it, also i have replaced a couple of computers in ...

...back in the truck but wont start has spark and fuel at rail but injectors wont fire? Has the right amount of fuel pressure at the test port. Has good blue spark. Changed out the fuel pump assembly. ...

back to the vacuum block at the intake manifold or fire-wall, and also back to where the line goes thru the fire-wall. Check the can for leaks or obvious holes. They used to be just a plain metal can,

...intake port of the fuel pump/filter; Fuel Filter - to my knowledge, there is no actual separate filter. There is a screen incorporated into the fuel pump, or in some versions in the fuel pressure ...

...intake manifold for vacuum leaks, use a can of spray carb cleaner and spray around the top of the engine, if you hit a leak the engine idle will change, P0302 is a miss in #2 cylinder (cylinder power ...