1988 Chevrolet C1500 "oil pressure sensor" Questions

...oil pressure sending unit closes the circuit to continue the fuel pump to run after start. In the event of a wreck ,the car stops running thus no oil pressure thus turns off power to the fuel pump .A ...

oil pump pressure,oil warning light,oil low,oil ewplacing and other car engine oil problems,the help links are provided below.Click the link to go through the procedure :-----Oil light came on and the

oil pressure problem i just put an edelbrock performer intake manifold n a holly carb with a1in spacer and new pushrods on a friends 1983 gmc sierra classic with a chevy 305 i got it running but now ...

oil pressure switch is on my 1988 chevy pick - up 1/2 ton 5.7 liter. Need a diagram or picture to see where it is exactly Hello: The oil pressure sensor is at the rear top of the engine near/under the

...OIL PRESSURE SWITCH (the oil pressure switch is located around the oil filter has one plug with 2 wires, it takes a SPECIAL SOCKET took me about 10 min. to do and had never done one before) Crank ...

...oil pressure sending unit located on the 2004 gmc ,4.8 vortec The Oil Pressure Sending Unit can be found at the top and rear of the engine, behind the back of the Intake Manifold. It is to the left ...

...oil pressure too The oil pressure will go up and down with the rpm of the engine. The idle going up and down is probably either the idle air control valve or the throttle position sensor, both of ...

...oil pressure sending units on these vehicles tend to have problems I have put in new ones that failed in a few days there just maid cheaply and it dosen't realy matter ware you get it dealer napa ...

...that controls automatic transmission shifting? there are several sensors including the VSS, TCM, vacuum actuator oil pressure and ECM the idea is to read the fault codes to show the problem ...

...oil pressure guage fluctuates massively. Then when you try to start it, it cranks but wont fire. no gas is getting to the carb. sometimes if you kick the gas pedal it starts. whats wrong? If you pull ...