2004 Chevrolet Malibu Maxx "shift handle removal" Questions

Ad

Question about Chevrolet Malibu Maxx

1 Answer

...SHIFT SELECTOR HANDLE ON MY AUTOMATIC TRANSMISSION IS LOOSE AND CAN BE PULLED UP. HOW CAN I REPAIR THIS PROBLEM ? HOW DO I GET CONSULE APART ? There are four bolts that hold this in place. you will ...

Ad

Question about Chevrolet Malibu Maxx

1 Answer

shift handle retaining clip at the front of the handle. Remove the shift handle from the shift lever. Open the console lid. Remove the console compartment inserts Remove the transmission select switch

Ad

...shift handle? years ago, I had the same problem, different year--make--model. I got the shift handle off, plastic piece sticking up through the shift tube, pushed the piece down with my thumb and ...

Question about Chevrolet Malibu Maxx

2 Answers

...below the handle to remove if you look at the backor sides of the shift , you will notice a small staple size clip. this needs to be carefully removed then you can remove the shift handle . GOOD ...

Question about Chevrolet Malibu Maxx

1 Answer

...shift handle? Did the button break? If so, about in the middle of the handle, on the front, side closest to the dash, is a U shaped clip that holds the handle on. Pry that out, you may have to tap on ...

Question about Chevrolet Malibu Maxx

1 Answer

...shift lever handle to lever, then remove shift lever handle. On models with manual transaxle, turn shift lever handle counterclockwise to remove from lever. On all models, carefully pry upward on ...

...lever inside the shift handle, pressing it down. You can just remove the handle and replace it with another, or you can simply reach in with your finger and press it downwards to release the shift ...

Question about Chevrolet Malibu Maxx

2 Answers

...shift lever handle and cover. Slide the handle bezel down. Remove the screw. Disconnect the TCS wire harness. Lift assembly from the shifter lever. Position the window regulator control panel aside. ...

Question about Chevrolet Malibu Maxx

1 Answer

...shift handle, remove the ignition cylinder by turning to the run position and pushing a small pin, drill bit or allen wrench into the hole on the bottom of the trim cover hole to release the ignition ...

Question about Chevrolet Malibu Maxx

1 Answer

...shift handle (7E067) to the control lever assembly (7E069). Remove the shift handle (7E067) from the control lever assembly (7E069). Remove the vent hose (7D494) from the notch in the detent plate. ...

Not finding what you are looking for?
Cars & Trucks Logo

375 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...