1995 Chevrolet Blazer "open hood broken cable chevy" Questions

...open the hood can you reach the cable itself?,or is it broke at the hood latch?IF its not broken at the outside latch, try to follow the cable,un-hook it from the handle and pull on the wire cable to ...

wire.now take two pairs of pliers.one to hold the black casing and one to pull the wire.that should open hood.once hood is open you'll see where cable attaches to hood latch.that cable needs replacing

...open, also in a pinch you can crimp off your hose to the heater coil at fire wall. Try to find the heater valve vacumb hose under the hood see if it is bad and fixit. or some models have a cable to ...

...hood open to replace the whole assembly A screw driver and lots of patience. I had that happen before and it's a pain. I now always lube with WD40 even if working good on my cars.  You just have ...

...open hood when hood release broken How to open hood from outside when the release cable on the inside is broken Take a pair of pliers, and pull the cable where handle hooked to it. Helps to have some ...

...hood open? Thank you for your help. Bill Larson - Harrison, TN [email protected] you have to disconnect the hood cable from where u usually would pull and disconnect it from their and just leave the ...

hood latch opening keeping it from closing. Try spraying the latch mechanism with WD-40 or similar light oil and operating the release cable a number of times. Check the condition of the release cable

hood on a 2000 Chevrolet Tracker. I pull the handle and nothing happens. I'm assuming it's broken, since I've never had this issue before. How can I get it open manually? The cable is probably broken,

...open hood - Broken release cable The hood release cable broke off right at the very top! I have a 1992 Chevy S10. How do I get it open. I have tried everything imaginable reaching through the grill ...

...open a chevy s10 hood I have a broken the hood release not easy. depending on where it is broken, if its broken at the handle, you can try a pair of vice grips on the cable where the handle would go ...