...80 psi, I have the instrument panel that displays in the mirror, it shows 120 psi, my question is.... Is this normal? Is it a problem? If it is a problem.... is it a fissable fixable problem?.....Or ...
instrument cluster center finish panel. Remove the parking brake release handle bolt. To install, tighten to 9 Nm (80 lb-in) . Position aside the parking brake release handle. Remove the parking brake
...Instrument Panel Cowl Brace 20 N606115-S100 Bolt (3 Req'd) A - Tighten to 9-14 Nm (80-123 Lb-In) B - Tighten to 10-14 Nm (89-123 Lb-In) C - Tighten to 2-3 Nm (18-26 Lb-In) D - Tighten to 47-63 Nm ...
Question about Chevrolet Corvette
...instrument panel and push it out of the facia. NB. Disconnnect the battery and wait for 15 mins. before removing airbag from steering wheel. Torque setting for steering wheel nut is 80 Nm or 59 lb ...
...80 while running stuck oil pressure gauge gmc 1500 could be one of two things, oil pressure switch (located on top of engine behind intake) or instrument panel cluster, if your vehicle has under ...
...80. So i replaced the sending unit on top back of block and no change is there another sending unit or baybee its in the gauge itself???????????? Sounds like your gauge is out of calibration. Replace ...
...80 lb in) Connect the electrical harnesses and the ground connections as needed. Install the HVAC module drain hose. Install the instrument panel carrier Install the accumulator. Connect the heater ...
...80 psi. I had the whole instrument panel replaced about 2 months ago and all the gauges are working properly. I have changed the oil twice since having this problem. I used a different oil filter the ...
Instrument Panel Carrier Replacement . Disconnect the HVAC module assembly electrical connectors. 1 HVAC Module Assembly Nut (Qty: 5) Tip Tighten the nuts in sequence. Tighten 9 N?·m (80 lb in) 2 HVAC
196 questions posted
Usually answered in minutes!
178 Questions
181 Questions
156 Questions
142 Questions
137 Questions