...around 40 to 45mph. I have recently replaced the tires with no effect on the vibration. I returned to the tire shop, they rechecked the tire balance (was good) and checked the alignment (was found to ...
around 40 to 55 mph it will sometimes shake and feels like its a misfire but i have replace spark plugs,wire, and battery and it still does it. Check your tire balance. When you have an out of balance
...around 50 mph. Just put new tires on, had an alignment done,still does same thing. Any ideas what would cause this? I bought a brand new car, took it for a run,got up to speed and the car started ...
...trans, 4 cyl. Car is shaking around 1700 RPM the most shake is on higher speed (40 mph ) i think that will be 3rd or 4th gear. What it can be? It could be as simple as your tire balance is
...car started shaking very badly around 40 MPH. Its an automatic. Any ideas why it shakes? Although you didn't say if it feels like the shaking is coming from a wheel, it sounds to me like you have ...
car shakes when accelerating around the speed of 40/45 mph. Unless I gun the motor then it smooths out. if you drive at 40 to 45 dose it shake all the time or dose it go away ? It shakes all the times
...AROUND 55 MPH IT SHAKES REALLY BAD..WHEN I SLOW DOWN TO 40 MPH IT STOPS SHAKING. ANY SUGGESTIONS TO WHAT THIS PROBLEM IS? Rael good indication of a tire out of balance or a drive shaft out of
shake and buck around 40 mph seems like if i step on gas it will come out of shaking, maybe some loss of power when bucking could be something with the ignition system, fuel filter. I would start with
...going around 40 mph. Ok at lower and higher speeds. Shaking is really bad when brakes applied at higher speeds. please help. more than likely you need to have your brake rotors resurfaced or ...
Question about Cars & Trucks
around 40 mph, but the wheel or steering doesnt shake, its the truck itself shaking. It's not as bad when i get up to 50mph. The check engine light 1998 ram shakes at low rpm's (1100-1700)
552 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: