1998 Chevrolet Monte Carlo "change engine oil light reset" Questions

...change reminder light with the accelerator pedal, turn the ignition switch to the ON position. Do not start engine. After turning the ignition ON, depress the accelerator pedal fully to the floor and ...

...Change Engine Oil" light? Do you have the service books, or owners books, that came with the car? I had the same problem with the "Change Engine Oil" light. The fix was in the book. If you don't have ...

change engine oil light there is a button to reset the oil light, check your car manual ,it should be there, when you find this button, all you have to do is hold down for 5 seconds,thats it ,plus YOU

...engine off, fully push and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON light flashes two times, the system is reset. However, if the light comes on and stays ...

...engine light just came on day before yesterday. It is just about 300 miles shy of its next oil change. When I checked the oil in it, it was extremely low so I added some but the light still ...

...engine OFF Fully press and release the accelerator pedal 3 times within 5 seconds. The oil change light will flash a few times and them go OFF. If the light is still on repeat the procedure. 2-- This ...

...up Reset oil change light. some GM cars and trucks switch on ignition, do not start engine press gas peddle to the floor then release and switch ignition off. This procedure is in the owners

change oil soon light stays on and service engine soon light has come on. You reset the change oil soon light by a couple of different ways depending on your model. Your owners manual will let you ...

Change Engine oil light comes on, even after oil change. How do I reset it? the dealer can or if you have the owners manual itll tell you

...the problem is fixed. If you are talking about the Service Engine Soon light. If its the OIL CHANGE light, then turn the key on and depress the gas pedal to the floor, 3 times. that should reset