Question about Ford Cars & Trucks
...spark plug change Never worked on van 98 ford and needing directions and photos in replacement of new spark plugs and wires just make sure that the plugs and wires are for your vehicle then change ...
...and backfire. 98 ford f150 i have a 98 ford f150, there's hesitation when i press the gas and also bacfire's. i changed the spark plug wire's, spark plugs, coil, and fuel filter' wires are ...
...Make sure that the firing order was not changed when you took the spark plug wires off of the plugs. You might also want to double check the gap on the plug. Let me know if neither of these were
Question about Chevrolet C2500
...spark plug change I changed the spark plugs and wires on my 98 Ford Windstar. It ran great during the test drive then just died. I haven't checked to see if it gets spark from the coil, but I smell ...
...spark plug gap setting for a 98 range rover? when i set them to land rover specs its not running well after tune up. also what else should i change with my tune up? ive got about 108k miles on it ...
...spark plug screws into only has 3 threads for the plug to seat in, which is not sufficient for holding these plugs in very well.. The reason I am bringing this up is if you try to replace these plugs ...
Question about Chevrolet C2500
spark plug wires? After you changed ONLY spark plug wires? I would say you failed to mark them before you took them off & make a diagram or have reference material & you put the wires on wrong
changed the spark plug wires on my 98 Mitsubishi Mirage and now I smell gas. you for got to change the spark wires 1 by 1, ooops. . now the firing order is wrong. which engine is it, of the many.?????
...spark plug wires (mark where they go), place a spark plug in one, ground it on the valve cover or intake manifold by the threads of the plug and have a friend turn the car over. Blue spark is ...
114 questions posted
Usually answered in minutes!
54 Questions
42 Questions
37 Questions
36 Questions
33 Questions